Key Mode
The key modes are:
Speed Dial: Press to dial the UserID when the accounts being configured as VPK.
Busy Lamp Field: Monitor the UserID status when the accounts being configured
as VPK.
Call Forward : Transfer the current active call to UserID when the accounts being
configured as VPK.
Call Intercom: Intercom/paging to the UserID when the accounts being configured
as VPK.
Speed Dial via Active Account: Similar to Speed Dial but it will dial based on the
current active account. For example, if the phone is offhook and account 2 is active,
it will call the UserID when the accounts being configured as VPK.
Dial DTMF: Dial the DTMF digits of the UserID when the accounts being configured
as VPK during the call.
Call Park: Configure the call park feature code to park or retrieve the call.
Multicast Paging: For multicast sending, please fill in the display name in the
Settings and fill in the sending address in the multicast address.
Speed Conference: Quickly dial up multiple numbers to set up a meeting.
Dial Prefix: After configured, once pressed this key, all numbers use this account
will automatically add the prefix promptly
Account Configures the SIP account when the accounts being configured as VPK.
Display Name Configures the display name when the accounts being configured as VPK.
User ID
Configures the UserID for the corresponding VPK mode when the accounts being
configured as VPK.
DTMF Content When key mode is set to Dial DTMF it Configures the dialed DTMF content.
Address
When key mode is set to Multicast Paging, it configures the multiple broadcast
address.
Conference Name When key mode is set to Speed Conference, it sets the speed conference name.
Mute all members
When key mode is set to Speed Conference, enables/disables mute all meeting
members.
Configure
When key mode is set to Speed Conference, it configures Speed Conference members
list:
Number: Enter member’s number.
Name: Enters member’s name.
Account: Specified the account associated.
Operation: + to add a member, – to delete a member.
Programmable Key General
Settings
General Settings
Enable LCD Turn On
Automatically when BLF/SCA
status changes
Configures whether the LCD should turn on automatically when BLF/SCA status
changes.
Proxy Prefix
Account
Displays account name if configured, otherwise, displays “Account X” where X is the
account number.
BLF Call-pick Prefix
Configures the prefix prepended to the BLF extension if the phone answers a call to the
monitored party by the BLF key.
Default setting is ** for each account.
To Next Page
Loading...
