Grandstream Networks GXV34 0 Series

Account/SIP/Special Features
Special Features
Congures phone’s settings to meet different vendors’ server requirements.
Users can choose from Standard, CBCOM, RNK, China Mobile, ZTE IMS, Mobotix, ZTE NGN, or Huawei
IMS depending on the server type.
Call Settings
Feature Key
Synchronization
This feature is used for BroadSoft / Metaswitch call feature synchronization. When it’s set to
BroadSoft / Metaswitch, DND and Call Forward features can be synchronized with BroadSoft /
Metaswitch server. The call forward function will take effect on the server side while the local call
forward function is not effective.
The default setting is “Disable”.
Conference URI
Congures the network-based conference URI (the BroadSoft Standard). If it is congured, end user
needs to tap the N-way key during the conference to transfer the host to the remote media server.
Broadsoft Call Center
When enabled, Feature Key Synchronization will be enabled regardless of web settings. Default is
Disabled.
Hoteling Event Enables BroadSoft Hoteling Event feature. Default is Disabled.
Call Center Status
When set to “Yes”, the phone will send SUBSCRIBE to the server to obtain call center status. Default is
Disabled.
SCA
Enable SCA (Shared
Call Appearance)
Enables/disables the Shared Call Appearance (the Broadsoft Standard) feature for this account. If it
is set to “Yes”, the phone system can update and share account status with another device. The
default setting is “No”.
Note: The Enable SCA settings now supports provision via strings. The value “0” can be replaced with
“line”or “private”; value “1” can be replaced with “shared” or “sharedline”.
Enable Barge-in
Enables/disables the Barge-In feature. If it is set to “Yes”, the user could tap the SCA account to barge
into an active session with another shared line.
The default setting is “No”.
Line-seize Timeout
(s)
Congures the interval (in seconds) when the line seize is considered timed out when Shared Line
feature is used. Valid range is 15-60.
Call Park
BroadSoft Call Park
Congures whether to send SUBSRCIRBE message to BroadSoft server to obtain Call Park
notications.
Disabled by Default.
Call Park Feature
Code
Congures the feature access code for parking current call to a parking lot or to another extension.
Auto-lling Call Park
Retrieve Feature
Code
If enabled, the Call Park Retrieve feature code will be automatically lled in the dialing interface when
the phone is in call pickup.
Enabled by Default.
Call Park Retrieve
Feature Code
Congures the feature access code for retrieving the parked call on accounts or BLF keys.