Grandstream Networks GXV34 0 Series

User Info
Management
Current Admin
Password
Enter current logged-in user’s password. This field is case sensitive.
The default password is “admin”.
New Admin Password
Allows the user to change the admin password. The password field is purposely blank after
clicking the “Save” button for security purpose. the admin password length limit is8 – 32
characters, including at least 1 number, 1 uppercase letter, 1 lowercase letter and 1 special
character.
Confirm Admin
Password
Enter the new Admin password again to confirm.
New User Password
Allows the administrator to set the password for user-level web GUI access. This field is case
sensitive with a maximum length of 32 characters.
The default password is “123”.
Confirm New User
Password
Enter the new User password again to confirm.
Encryption Settings
TLS
Minimum TLS Version Configures the minimum TLS version supported by the phone.
Maximum TLS
Version
Configures the maximum TLS version supported by the phone.
Enable Weak TLS
Cipher Suite
Defines the function for weak TLS cipher suites. If set to “Enable Weak TLS Cipher Suites”, allow
users to encrypt data by weak TLS cipher suites. If set to “Disable Symmetric Encryption
RC4/DES/3DES”, allow users to disable weak cipher DES/3DES and RC4.
Certificate
Management
Trusted CA Certificate
User CA
Add Allows to Add or Delete User CA file to phone.
System CA Lists trusted CA certificates previously uploaded. Administrator can delete a certificate from here.
User Certificate
Add Certificate Allows to add or delete User Certificate file to phone.
Table 38: System Settings/Security Settings
System Settings/Preferences
LCD & LED Management
Enable Missed Call
Backlight
If set to “Yes”, LCD backlight will be turned on when there is a missed call on the phone.
The default setting is “Yes”.
Note:Reboot is required for the setting to take effect
Enable Missed Call
Indicator
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when there is
missed call on the phone.
Default setting is “Yes”.
Enable MWI Indicator
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when there is new
voicemail on the phone. If it set to “No”, the LED indicator will keep off if the phone system receives
SIP NOTIFY message about unread voice mail.
The default setting is “Yes”.
Enable New Message
Indicator
If set to “Yes”, the LED indicator on the upper right corner of the phone will light up when there is new
message on the phone.