Applications/LDAP Phonebook
Applications/Recording
Call Recording
File name Displays the name of the recording file
Duration Displays the duration of the phone call
Date Displays the date the call was recorded on
Operation Delete, Modify or download the recording file
Normal Recording
File name Displays the name of the recording file
Duration Displays the duration of the phone call
Date Displays the date the call was recorded on
Operation Delete, Modify or download the recording file
Table 50: Applications/Recording
Value-added Service Page Definitions
Value-added Service/Value-added Service
Value-added
Service (0/25)
Service Type
Users can set the service type to “Door System” to configure the door system options, or to “DTMF”
to set DTMF content to send it during calls.
Door System Type
Set the door system type to “GDS” if the GDS door system is used, or set it to “Baudisch” if another
door system brand is used.
Note: Each GDS door system has 2 different access passwords to control 2 doors separately named as
[Related Display Name1] & [Related Display Name2] below for door 1 and 2 respectively.
The default setting is “No”.
LDAP Lookup For Incoming Call
Sets the phone system to do LDAP number searching for incoming calls. The default
setting is “No”.
LDAP Sorting
Allows the user to sort the LDAP contact results by number.
Disabled by Default.
LDAP Dialing Default Account
Congures the default account that being used when dialing LDAP contact. Users may
choose the Account 1-6,
the default setting is “Default”.
To Next Page
Loading...
