The IP address or URL of System log server. The server collects system log
information from the device.
Select the GXW400X to report the log level. Default is NONE. The level is
one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent
based on the following events:
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it
contains the following components:
GS_LOG: [device MAC address][error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]
Ethernet link is up
If Syslog is enabled and Send SIP Log is set to YES, then SIP messages will
also be delivered via Syslog. Default is set to NO.
To Next Page
Loading...
Need help?
General
