DNS SRV use
Registered IP
Choose whether to enable DNS SRV to use Registered IP when DNS mode is
set to SRV or NAPTR/SRV. If set to Yes, the device will send the request to IP
which is used for SIP REGISTER request. If set to No and DNS Mode is SRV or
NAPTR/SRV, the device is going to send request to the IP based on SRV
priority order. Default is No.
Configure the primary IP for DNS Mode: Use Configured IP
Configure the first backup IP for DNS Mode: Use Configured IP
Configure the second backup IP for DNS Mode: Use Configured IP
The default setting is “Disabled”. If the phone has an assigned PSTN
Number, this field should be set to “User=Phone” then a
“User=Phone” parameter will be attached to the “From header” in the SIP request
to indicate the E.164 number. If server supports TEL URI format, then this option
needs to be selected.
Use Request
Routing ID in SIP
INVITE Header
If set to Yes, device will use Request URI Routing ID defined in FXS ports
settings to replace From and Contact headers for outgoing calls.
This parameter controls whether the GXW400X needs to send REGISTER
messages to the proxy server. The default setting is “Yes”.
Default is No. If set to “Yes”, the SIP user’s registration information is cleared
on reboot.
To Next Page
Loading...
Need help?
General
