Outgoing Call
without Registration
Default is No. If set to “Yes,” user can place outgoing calls even when not
registered (if allowed by Internet Telephone Service Provider) but is unable to
receive incoming calls.
Any port, member of a Hunting Group that is not registered with a SIP account,
will be able to place outbound calls using the SIP credentials of the primary
Hunting Group port.
For example: Port 1, 3 and 5 are members of the same Hunting Group. Port 1
is registered with a SIP account. Ports 3 and 5 are not registered. Ports 3 and
5 will be able to place outbound calls using the SIP account of port 1, even if
Outgoing Call without Registration is set to No
Allows the user to specify the time frequency (in minutes) for the GXW400X to
refresh its registration with the specified registrar. The default interval is 60
minutes (or 1 hour). The maximum interval is 65535 minutes (about 45 days).
Reregister before
Expiration
This parameter allows the user to specify the reregistration time before
expiration.
Defines the local SIP port the GXW400X will listen and transmit. The default value
for Profile 1 is 5060 and 6060 for Profile 2.
Defines the local RTP port pair the GXW400X will listen and transmit. It is the
base RTP port for channel 0. When configured, channel 0 will use this port _value
for; channel 1 will use port_value+2 for RTP. The default value for Profile 1 is
5004 and 6004 for Profile 2.
To Next Page
Loading...
Need help?
General
