Installing the Software
Install the software housed in the attached CD-ROM into the PC that is used.
This section explains how to install the software when using a Windows 7 (32 bit) operating environment.
•
Upon installation, be sure to log on Windows using an account with administrator privileges on your computer.
If you have logged on using a standard user account, an [User Account Control] screen asking you to enter the
administrator account password may appear.
•
Supported OS
This software supports the following OS environments:
Windows 8 (32 bit/64 bit), Windows 7 (32 bit/64 bit), Windows Vista (32 bit/64 bit), Windows XP SP3 (32bit/64bit)
* For the latest OS, please access our web site
1. Launching the Start Menu
After starting up Windows, insert the [USER GUIDE & SOFTWARE CD] provided with the CE6000-120AP into your
computer's CD drive.
The below screen will appear before the Start Menu launches.
Continue with installation in accordance with the following procedures.
1 The Windows [AutoPlay] screen will appear.
Select [Run MultiSetup.exe] from the Windows [AutoPlay] screen.
* If the [AutoPlay] screen does not appear, open [Explorer] and select the CD drive containing the software to be installed.
Open the CD and double-click on [MultiSetup.exe].
Supplement
If you have logged on using a standard user account,
an [User Account Control] screen asking you to enter
the administrator account password may appear.
Enter the password, and then click [Yes].
2 Click [Yes] if you have logged on using an administrator account.
3 The [Start] will appear.
"Use this menu to install the software you require to use
the CE6000-120AP. First-time users should proceed with installation
by clicking on [Install CE6000-120AP Software]."
Proceed with installation according to your operating environment.
A
B
A. Install CE6000-120AP Software:
Install the [CE6000-120AP Driver].
B
. Install User's Manual:
Installs the CE6000-120AP User's Manual.
To Next Page
Loading...
