CE6000-UM-251-9370 8-8
8 SERVICE MODES
The rst testing menu is displayed. And follow the instructions on the menu.
Press the F1 key to continue to the next test, after you check the CAM lever sensor.
(8) The testing items are shown below.
1 Cam lever sensor 2 Home sensor 3 Push roller sensor 4 Rear media sensor
5 Font media sensor 6 X motor signal 7 Y motor signal 8 Tool height signal
9 [1] key 10 [2] key 11 [3] key 12 [4] key
13 Right arrow key 14 Left arrow key 15 Up arrow key 16 Down arrow key
17 ENTER key 18 COND/TEST key 19 ORIGIN key 20 FAST key
21 SIMPLE key 22 COPY key 23 PAUSE/MENU key
To Next Page
Loading...
