GRAPHTEC CE6000-60 - Control Panel Key Board

CE6000-UM-251-9370 6-16
6 DISASSEMBLY AND REASSEMBLY
6.2.9 Control Panel Key Board
How to detach the control panel key board
(1) Detach the right side cover (See section 6.1.1.).
(2) Disconnect the control panel exible cable from the main board.
(3) Remove the three M3L5 binding head screws holding the control panel assembly, and then
detach the control panel assembly.
M3L5 binding head screw
Control panel exible cable
Control panel assembly
(4) Disconnect the LCD exible cable from the control panel key board.
LCD exible cable
(5) Remove the ve M2L5 self-tapping screws holding the control panel key board.
M2L5 self tapping screw
Control panel key board
(6) Detach the control panel key board.
The ve hooks are holding the control panel key board, release those hooks when the control
panel key board is removed.
Hook