GRAPHTEC CE7000-130 - Chapter 1: Product Summary; 1.1 Checking the Accessories; 1.4 Connecting to the Computer

CE7000-UM-251-9370 1-1
1 INTRODUCTION
1 INTRODUCTION
CAUTION
DOUBLE POLE/NEUTRAL FUSING
1.1 Main Specications
1.1.1 CE7000 Main Specications
CE7000-40 CE7000-60 CE7000-130 CE7000-160
CPU 32-bit
Conguration Grit-rolling plotter
Drive Digital servo
Max. cutting area 375 mm x 50 m
603 mm x 50 m 1290 mm x 50 m 1524 mm x 50 m
Guaranteed precision cutting area
*1
315 mm x 2 m 583 mm x 5 m
*2
1250 mm x 5 m
*2
1504 mm x 5 m
*2
Mountable media width
*3
Min. 50 mm
Max. 484 mm
Min. 50 mm
Max. 712 mm
Min. 50 mm
Max. 1372 mm
Min. 50 mm
Max. 1626 mm
Available roll media diameter Max. diameter: 180 mm, Min. diameter: 76 mm
Number of push rollers 2 2 4 4
Max. cutting speed (Axial)
60 cm/sec(All direction) 90 cm/sec (45˚ direction) 100 cm/sec (45˚ direction)
Specifiable speeds 1 to 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60
cm/sec
1 to 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60,
64 cm/sec
1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60,
70, 71 cm/sec
Max. cutting force 4.41N (450gf)
Min. character size 5 mm (0.197 in) alphanumeric Helvetica med. Font
*1
Mechanical resolution 0.005mm
Programmable resolution GP-GL: 0.1/0.05/0.025/0.01 mm, HP-GL
*4
: 0.025 mm
Repeatable accuracy
*1
0.1 mm/in unit of 2 m (Designated Film and Cut Conditions)
Number of cutters/pens 1
Pen types Water-based fiber-tip pen, oil-based ballpoint pen
Compatible media Mono-vinyl chloride media, fluorescent media, and reflective media up to 0.25 mm
thick (Excluding the high reflective media)
Interfaces USB2.0 (Full Speed)/Network (Ethernet 10BASE-T/100BASE-TX)/RS-232C
*6
Buffer memory 2 MB
Resident command sets GP-GL/HP-GL
*4
(Control panel switching, Auto switching)
LCD Panel Graphic type (240 x 128 dots)
Power supply AC100-120V, AC200V-240V 50/60Hz
Power consumption 100 VA or less
Operating environment Temperature: +10˚C to +35˚C
Humidity: 35% to 75% (non-condensing)
Guaranteed accuracy environment Temperature: +16 ˚C to +32 ˚C
Humidity: 35% to 70%(non-condensing)
External dimensions (W x D x H)
722 x 460 x 313 mm 1005 x 582 x 1092 mm
*5
1704 x 811 x 1215 mm
*5
1916 x 811 x 1215 mm
*5
Weight (Approx.) 13 kg
*5
22 kg
*5
51 kg
*5
55 kg
*5
*1: Varies depending on the type of Graphtec-authorized lm and the cutting conditions.
*2: When using basket.
*3: Describes the usable paper width. The accuracy of minimum media width is the width in parentheses ( ).
*4: HP-GL is a registered trademark of the US Hewlett Packard Company.
*5: Roll-medium tray or stand is included.
*6: RS-232C interface is optional depending on region. For details, please contact the distributor where you purchased.