CE7000-UM-251-9370 1-7
1 INTRODUCTION
1.3 Option & Supply Parts
1.3.1 CE7000 Option & Supply Parts
Option
Option mane Model name Description Q’ty
Stand ST0118 Used with CE7000-60 1 set
Basket PG0103 Used with CE7000-60 1 set
PG0104 Used with CE7000-130 1 set
PG0105 Used with CE7000-160 1 set
Carrier Sheet Table OPH-A45 Used with CE7000-40/60 1 set
Supply Parts
Supply mane Model name Description
Cutting blade holder PHP33-CB09N-HS 1 piece: for CB09U series blade.
PHP33-CB15N-HS 1 piece: for CB15U series blade.
PHP35-CB09N-HS 1 piece: for CB09U series blade. Metal top type
PHP35-CB15N-HS 1 piece: for CB15U series blade. Metal top type
Cutting blade CB09UB-5 5 blades/pack: 0.9 mm dia. 45º angle, Supersteel
CB09UB-K60-5 5 blades/pack: 0.9 mm dia. 60º angle, for thin lm
CB15U-5 5 blades/pack: 1.5 mm dia. 45º angle, Supersteel
CB15U-K30-5 5 blades/pack: 1.5 mm dia. 30º angle, for sandblast rubber
CB15UA-5 5 blades/pack: 1.5 mm dia. 45º angle, for high intensity reective lm
CB15UA-K30-5 5 blades/pack: 1.5 mm dia. 30º angle, for high intensity reective lm
Water-based ber-tip pen holder
PHP31-FIBER 1 piece: pen holder for KF700 series pen
Water-based ber-tip pen KF700-BK 10 pens/pack: pen (black)
KF700-RD 10 pens/pack: pen (red)
Oil-based ballpoint pen holder
PHP34-BALL 1 piece: pen holder for KB700 pen
Oil-based ballpoint pen KB700-BK 10 pens/pack: pen (black)
1.3.2 CE7000AP Supply Parts
Supply Parts
Supply mane Model name Description
Cutting blade holder PHP33-CB09N-HS 1 piece: for CB09U series blade.
PHP33-CB15N-HS 1 piece: for CB15U series blade.
Cutting blade CB09UB-5 5 blades/pack: 0.9 mm dia. 45º angle, Supersteel
Water-based ber-tip pen holder
PHP31-FIBER 1 piece: pen holder for KF700 series pen
Water-based ber-tip pen KF700-BK 10 pens/pack: pen (black)
KF700-RD 10 pens/pack: pen (red)
Oil-based ballpoint pen holder
PHP34-BALL 1 piece: pen holder for KB700 pen
Oil-based ballpoint pen KB700-BK 10 pens/pack: pen (black)
To Next Page
Loading...
