GRAPHTEC CE7000-130 - Adjusting the 2 Nd Pen Exchange Position (CE7000-130 AP); Inputting the 2 Nd Pen Exchange Position from the Recorded Value

CE7000-UM-251-9370 8-44
8 Electrical Adjustment
8.16 Adjusting the 2nd Pen Exchange position (CE7000-130AP)
This adjustment will set the 2nd pen exchange position for the CE7000-130AP.
8.16.1 Inputting the 2nd Pen Exchange position from the recorded value
Perform this procedure if adjustment values could not copy from the SUB-NVRAM when replacing the main
board for the CE7000-130AP.
How to input the 2nd Pen Exchange position
(1) Turn on the power while pressing the SLOW and the ENTER keys.
(2) The plotter displays the following menu.
(3) Press the PAUSE/MENU key to display the following menu.
(4) Press the Right position key to display the following menu.
(5) Press the Down position key until the following menu is displayed.
(6) Press the F2 key to display the following menu.