GRAPHTEC CE7000-130 - Installing the Optional Basket for CE7000-60

CE7000-UM-251-9370 2-13
2 Setup
2.2.4 Installing the optional basket for CE7000-60
Procedure
(1) Take out the following part of stand from the packing box.
Allen wrench (for M5 cap screw)
M5L10 ange cap screw x 8
Basket Cloth Arm x 4
Basket tube short x 2
Basket tube long x 1
Basket Cloth x 1
(2) Attach the basket cloth arms to the foot of stand.
Conrm the direction of basket cloth arm as shown in the picture below, and then attach the basket cloth
arm to the foot of stand.
Fasten with the eight M5L10 ange cap screws (two long screws for each basket cloth arm), using the
Allen wrench.
!
!