GRAPHTEC CE7000-130 - Page 140

CE7000-UM-251-9370 7-66
7 DISASSEMBLY AND REASSEMBLY
Conrming the exible cable wiring from the cam sensor board to the main board
The exible cable has a right side and a wrong side, connect the exible cable correctly as shown in the
picture below.
CE7000-40/60
Cam sensor exible cable
Cam sensor board
Conrm the printed side,
which is facing to the bottom.
Cam sensor exible cable
Conrm the printed side,
which is facing to the rear.
CE7000-130/130AP/60
Cam sensor exible cable
Cam sensor board
Conrm the printed side,
which is facing to the front.
Cam sensor exible cable
Conrm the printed side,
which is facing to the top.