GRAPHTEC CE7000-130 - Chapter 6: Manual Position Adjust; 6.1 Outline of Manual Position Adjust; 6.2 Manual Position Adjust

CE7000-UM-251-9370 8-18
8 Electrical Adjustment
Adjustment Menu List
Sensor & Key test.
Pen pressure adjustment.
Distance adjustment.
Sufxsetting(SettoSTDforstandardmodel,Donotchange.).
Registration mark sensor sensitivity adjustment.
Registration mark sensor position adjustment.
Home sensor position adjustment (Do not change.).
Registrationmarksensorlevelconrmation.
Dots check for the LCD.
Running test for X and Y directions.
Registration mark sensor hood condition (Do not change.).
Running test for registration mark sensor hood.
Do not use.
Pen force setting for the maintenance mode.
X media sensor position adjustment.
Priority of Soft ID reset command (Do not change.).
Pen position adjustment.
2-pen exchange position adjustment for the CE7000-130AP.
2-pen detecting height adjustment for the the CE7000-130AP.
Displays cutting distance.
Number of push rollers setting.
Aging (This is used for production line.).
Do not use.