GRAPHTEC CE7000-130 - Page 97

CE7000-UM-251-9370 7-23
7 DISASSEMBLY AND REASSEMBLY
(8) Tighten the M4L6 TP screws xing the Y-belt tension to keep the Y belt tension for the CE7000-40/60.
Tighten the two M4L6 TP screws xing the Y-belt tension to keep the Y belt tension for the CE7000-
130/130AP/160.
Tension xing screw
Tension xing screw
CE6000-40/60
CE6000-130/130AP/160
(9) Reattach the other parts in the reverse order in which they were detached.