GRAPHTEC CS500 - Part Names and Functions

CS500/IS200 2 – 7
2. PREPARATION
2.2 Part Names and Functions
Front View
Stand
Basket
Top cover
Paper sensor
Cover sensor
Control panel
Caster
Lock
Release
CS500
Document guides
Document guides
Stand
Basket
Caster
Top cover
Paper sensor
Cover sensor
Control panel
Lock
Release
Release
Release
IS200
Top cover
Open the top cover to clean the document hold-down unit and transparent contact plates.
Paper sensors
These sense whether a document is present in the scanner.
Cover sensor
This senses whether the top cover is open or closed, and interrupts scanner operation if
the top cover is opened during operation.
Document guides
Use these guides to determine the position of a document when you load the document.
Control panel
Use the keys to operate the scanner and the LEDs to monitor the operating status.
Stand
The stand unit is assembled for mounting of the scanner unit.
Basket
Receives the document that has been scanned.
Casters
Release the lock on the casters to allow the unit to be moved.
Do not touch the paper sensors.