CS500/IS200 4 – 3
4. LOADING A DOCUMENT
4.2 Loading a Document
Insert the document onto the document-scanning table face down so that it presses against
the rollers evenly.
How to use the document guides
•Move the document guides to the left and right until they are adjusted to the document
width.
• Place the document between the document guides.
• Move the document guides back to the edges of the scanner after you have loaded the
document.
• This ensures that the document does not get damaged if it is fed at an angle.
Document-scanning table
Document guides
The above illustration is of the CS500 model.
To Next Page
Loading...
