Software
4-39
Superimpose/Link
A file can be opened on top of data that is already opened, enabling the superimposed display of
multiple data. In addition, multiple data can be linked and displayed
(1) Add: Selects a binary file on the computer.
(2) Delete: Deletes the file that was added.
Convert Then Save
After data has been converted, click the "Convert Then Save" button to display the following
submenu.
(1) Format
GBD: GL450 dedicated binary format.
Note: Use this format if you want to replay the captured data via the OPS022 software.
CSV: A TXT format for processing data in Excel.
Note: If the CSV file was created using the OPS022 software or at the GL450, it can be opened via the
OPS022 software.
(2) Path: Specifies the data capture location for the converted data.
(3) Data
All: All the measured data is converted.
Cursor: Only the data between the A and B cursors is converted.
(4) Spot Samples
Off: Spot sampling is not performed
2, 5, 10, 20, 50, 100, 200, 500, 1000: Data is sampled at the point interval specified.
To Next Page
Loading...
