4-40
Software
Display in EXCEL
This function displays the captured data being displayed in Excel format.
CHECKPOINT
This function cannot be used unless the Microsoft Excel software program is installed in your computer.
(1) Data
All: All the measured data is converted.
Cursors: Only the data between the A and B cursors is converted.
(2) Spot Samples
Off: Spot sampling is not performed
2, 5, 10, 20, 50, 100, 200, 500, 1000: Data is sampled at the point interval specified.
Example
Print
This function enables waveforms to be printed. The required settings must be made at the printer in
advance. If settings have been made for several printers, output is made to the active printer.
To Next Page
Loading...
