2-2
Checks and Preparation
2.1 Checking the Outer Casing
After unpacking, check the GL450's outer casing before use. In particular, please check for the following:
• Surface scratches
• Other flaws such as stains or dirt
2.2 Checking the Accessories
After unpacking, check that the following standard accessories are included. The accessories included will
differ depending on the model purchased.
Standard Accessories
Optional Accessories
Item Remarks Quantity
Quick Start Guide GL450-UM-851 1
CD-ROM User's Manual, Application software 1
LCD Protector For protecting the LCD surface 1
AC cable/AC adapter 100 to 240 VAC, 50/60 Hz 1
Screwdriver for input terminal unit Fits inside the main unit 1
10-ch input terminal unit Input terminals for 10 channels 1
(2 input terminal units can be mounted in the main unit)
Item Option No. Remarks
10-ch input terminal unit 10TU Input terminals for 10 channels
20-ch input terminal unit 20TU Input terminals for 20 channels
(can be mounted in the main unit)
50-ch input terminal unit 50TU Input terminals for 50 channels
(used outside the main unit)
Battery pack B-517
Logic/alarm cable B-513 Bare tips (2 m)
DC drive cable B-514 Bare tips (2 m)
Connection cable B-515 1-m length
(to connect two main units together)
(for synchronized sampling during PC measurement)
T-type thermocouple JBS-7115-5M-T 5-m length, 4 thermocouples per set
K-type thermocouple JBS-7115-5M-K 5-m length, 4 thermocouples per set
Humidity sensor B-350 3-m length
To Next Page
Loading...
