5-8
Specifications
5.3 Accessory/Option Specifications
Control Software
Battery Pack (Option)
Humidity Sensor B-530 (Option)
Item Description
Compatible operating Windows 2000/XP
system
Functions Main unit control, realtime data capture, data conversion
Main unit settings Input settings, memory settings, alarm settings, trigger settings
Captured data Realtime data (CSV, Binary)
Memory data (CSV, Binary)
PC card data
Display Analog waveforms, logic waveforms, pulse waveforms, digital values
Display modes Waveform View, Digital View, Meter View, Report View
File conversion Between cursors, All data
Monitor functions Alarm monitor enables sending of email to the specified address
Dual-screen function Displays the current data alongside past data
Report function Automatic creation of daily or monthly files
Maximum/Minimum
The maximum, minimum and current values are displayed during measurement
Item Description
Capacity 7.4 V/2200 mAh; mounted in the main unit
Running time When using the LCD display: approx. 2 hour or more
When using the screensaver: approx. 3 hours or more
Note: The running time depends on the operating environment and the amount of charge
left in the battery.
Battery type Lithium secondary battery
Charging method Mount in the main unit, or use a separate battery charger
Note: If mounted in the main unit for charging, the power switch must be turned off.
Time required for charging Main unit: approx. 4 hours
Switchover in the case of Because the battery is used together with the AC adapter, the power supply
a power failure will be switched automatically to the battery in the event of a power failure.
Note: The AC adapter is the primary power source.
Other functions When the battery is running low, memory data is saved automatically to the
PC card.
When data is being saved directly to the PC card, the file is closed
automatically.
Item Description
Allowable temperature range
-25 to +80°C
Allowable humidity range 0 to 100% RH
Relative humidity ±3% RH (5 to 98% RH at 25°C)
measurement accuracy
Response time 15 s (90% response when membrane filter installed)
Sensor output 0 to 1 VDC
External dimensions φ14 mm x 80 mm (excluding cable)
Cable length 3 m
To Next Page
Loading...
