3-4
Settings and Measurement
SPAN settings
*1 When 1-5V has been specified and the range is changed, it becomes a
±
range. If the 1-5V range is required,
please select 1-5V for the range setting once again.
*2 With the temperature ranges, the measurement range will depend on the type of sensors used. If you want to
make detailed settings, please set the range again.
POSITION settings
If the ENTER key is pressed when POSITION has been selected, the position can be moved.
Voltage ranges: In 10% units of the range
Temperature ranges: In 10% units of the following ranges:
50.0, 100.0, 200.0, 500.0, 1000.0, 2000.0
(3) TIME/DIV key
Press the TIME/DIV key to switch through the waveform display speeds.
1 • 2 • 5 • 10 • 20 • 30 • 1 • 2 • 5 • 10 • 20 • 30 • 1 • 2 • 5 • 10 • 12 • 24
sec/DIV min/DIV
hour/DIV
TIME/DIV display
(4) START/STOP key
Press the START/STOP key to select the START status (Armed). Press it once again to select the
STOP status (Free Running).
20 mV 0.200 to 40.000 mV/F.S. 2 V 0.0200v4.000 V/F.S.
50 mV 0.50 to 100.00 mV/F.S. 5 V 0.050 to 10.000 V/F.S.
100 mV 1.00 to 200.00 mV/F.S. 10 V 0.100 to 20.000 V/F.S.
200 mV 2.00 to 400.0 mV/F.S. 20 V 0.200 to 40.000 V/F.S.
500 mV 5.0 to 1000.0 mV/F.S. 50 V 0.50 to 100.00 V/F.S.
1 V 0.0100 to 2.0000 V/F.S. 1-5 V*
1
0.040 to 4.000 V/F.S.
Temperature*
2
50.0 to 2200.0 °C/F.S.
Voltage
To Next Page
Loading...
