Software
4-11
4.6 Menu Configuration and System Settings
Starting the Software
Click "Start" "Programs" "OPS022" to launch OPS022. Once started, the following window is
displayed.
(1) Connect (2) Review PC
(8) Meter View (9) Report View
(12) Settings
(13) Start (15) Review Device
(14) Stop
(22) X-axis Display Width (23) Format
(10) Y-T
(5) Status View
(16) EXIT
(17) Maximum/Minimum
(20) Alarm History
(21) Alarm Cancel
(18) Logic
(4) Info Message
(6) Waveform View
(7) Digital View
(11) X-Y
(19) Alarm
(3) Print
(24) Comment
Menu Configuration
Menu Name Selections
(1) Connect Connection method USB, TCP-IP
Edit No., Name IP Address, Port, USB ID
Group: Setting groups 1 to 10
Host: Master, Slave
Status: OK/NG
Delete, Connect, Disconnect, Load Conditions, Save Conditions
(2) Review Open File
Superimpose/Link Select files to superimpose/link: Add, Delete
Convert then Save File Path: Format, Path
Data: All Cursor
Spot Samples: Off, Select from 2 to 1000 points
Open in EXCEL Data: All Cursor
Spot Samples: Off, Select from 2 to 1000 points
Print
XY Between Cursors
Calculation
Comment Input, Delete
(3) Print
(4) Info Message Start Time, Capture Number, Capture Time, Capture Interval
(5) Status View Stopped, Armed, Recording, Finished
To Next Page
Loading...
