3-47
CHAPTER 3 Settings and Measurement
(2) DATA settings
This is used to specify capture-related items and calculations.
Setting Selections available
Sampling 10, 20, 50, 100, 125, 200, 250, 500ms, 1, 2, 5, 10, 20, 30s, 1, 2, 5, 10, 20, 30min, 1h
* Available sampling intervals vary depending on the input settings and the number of
channels to be used.
* Refer to "(2)-1 Sampling Interval" for details.
Capture destination SD1 (Internal memory), SD2 (SD CARD)
File Name * See the description of a captured data le name given below.
Ring/Relay capture Off, Ring, Relay
Ring capture Number of recording points
Relay capture Relay capacity (100MB to 2000MB), Relay time ( 1 hour 00 minute to 24 hours 00 minutes )
External sampling Off, On
AC Line Filter Off, On
Backup Backup Intervals Off, 1, 2, 6, 12, 24 hours, or Off, By le
* Refer to “(4)- 5 OTHER settings” to select each le.
Backup Destination SD1 (Internal memory), SD2 (SD CARD), FTP
Save Folder Folder name
Calc. Settings 1 Off, Average, Max, Min, Peak, RMS
Calc. Settings 2 Off, Average, Max, Min, Peak, RMS
Captured data le name
Setting Selections available
Folder (File) Capture destination : SD1 (Internal memory), SD2 (SD CARD)
Folder : Text input (if the naming method is Auto)
File : Text input (if the naming method is Arbitrary or Sequential number)
Name Type Auto, Arbitrary, Sequential number
File Type Binary (GBD), Text (CSV)
To Next Page
Loading...
