GRAPHTEC GL840 - Page 137

3-61
CHAPTER 3 Settings and Measurement
(4) Interface settings
This menu is used to specify conditions for PC connection.
Selection item Description
USB
settings
USB ID 0 to 9
Wired LAN
settings
IP address automatic acquisition On, Off
IP address 0 to 255. 0 to 255. 0 to 255. 0 to 255
(Only when not using IP address automatic
acquisition)
Detailed
Settings
IP address 0 to 255. 0 to 255. 0 to 255. 0 to 255
(Only when not using IP address automatic
acquisition)
Subnet mask 0 to 255. 0 to 255. 0 to 255. 0 to 255
(Only when not using IP address automatic
acquisition)
Port number 1024 to 65535
Gateway 0 to 255. 0 to 255. 0 to 255. 0 to 255
(Only when not using IP address automatic
acquisition)
Disconnect when GLT400 is not
communicating
DNS address 0 to 255. 0 to 255. 0 to 255. 0 to 255
(Only when not using IP address automatic
acquisition)
Apply settings Execute
Apply settings Execute
Wireless
LAN
settings
* When
optionally
connecting
to wireless
LAN
Wireless LAN Off, station, access point
Restart wireless LAN Execute
Detailed
Settings
Wireless LAN Off, station, access point
Easy
Connection
(WPS)
WPS system Push button method / PIN method
Station
settings
SSID search Enter the character string
SSID input Execute
Encryption method None, WEP, WPA-PSK/WPA2-PSK
WEB key, Password Enter the character string
11n Off, On
Apply settings Execute
Other Settings
(When setting
the station)
Connect/Disconnect Execute
ST-IP settings Refer to Wired LAN Settings
Access point
settings
SSID search Enter the character string
Encryption method None, WEP, WPA-PSK/WPA2-PSK
WEB key, Password Enter the character string
Channel 1ch to 13ch
Stealth Off, On
11n Off, On
Apply settings Execute
Other Settings
(When setting
the access
point)
AP-IP settings Refer to Wired LAN Settings