GRAPHTEC GL840 - Page 138

3-62
CHAPTER 3 Settings and Measurement
Selection item Description
Remote unit
settings
Connection I/F Wired LAN, Wireless LAN
Connection remote unit Wireless sensor, remote terminal, list
When setting
wireless LAN
Number WL: 1 to 5
RT: 1 to 5
Connect Off, On
Unit name, identication name Enter the character string
Search Search execute Execute
List of wireless sensors, List of
remote terminals
Displays the wireless sensors or the remote
terminals found by search.
AMP1/2, Number of AMP terminals Displays the set AMP information.
When making
wired LAN
settings
Number RT: 1 to 5
Connect Off, On
Identication name Displays the set identication name.
Search Search execute Execute
Direct input Connection
destination
Identication name, IP address, domain name
Identication
name
Enter the character string
IP address 0 to 255. 0 to 255. 0 to 255. 0 to 255
Port number 0 to 65535
Domain name Enter the character string
List of remote terminals Displays the remote terminals found by search.
Number of AMP terminals Displays the set number of amplier terminals.
List Number RT: 1 to 5
Connect Off, On
AMP Displays the set AMP.
Other
settings
New Line Code CR+LF, LE, CR
FTP client
settings
FTP server Enter the character string
User name Enter the character string
Password Enter the character string
Port number 0 to 65535 (default 21)
PASV mode Off, On
Encryption method Off, Explicit, Implicit
FTP server connection test Execute
Captured le when backup is successful Leave, Delete
FTP server
settings
Anonymous connection Disable, Enable
User name Enter the character string
Password Enter the character string
Port number 0 to 65535 (default 21)
WEB server
settings
Port number 0 to 65535 (default 80)
Basic authentication Off, On
User name Enter the character string
Password Enter the character string