GRAPHTEC GL840 - Page 139

3-63
CHAPTER 3 Settings and Measurement
Selection item Description
Email
settings
Email send
setting
Destination
setting
To Enter up to 63-character string
CC1 to CC3 Enter up to 63-character string
Subject Enter up to 63-character string
Notication
settings
Alarm Off, On
Low Battery Off, On
Low
communication
strength
Off, Onn
Free space in SD
CARD
Off, On
Periodic
notication
Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours,
specied time
Email account
settings
User name Enter up to 63-character string
Password Enter up to 31-character string
mail address Enter up to 63-character string
Email sending
server settings
Sending (SMTP) server name Enter up to 63-character string
SMTP port number 0 to 65535
Time zone UTC-12:00 to UTC+13:00
SMTP
settings
SMTP
authentication
method
Off, POP before SMTP, SMTP-AUTH
SMTP-AUTH Off, PLAIN, LOGIN, CRAM-MD5
Same as POP3 No, Yes
SMTP user name
(user ID)
Enter up to 63-character string
SMTP password Enter up to 31-character string
SMTP encryption Off, StartTLS, Over SSL
Test sending Execute
Email receiving
server settings
Receiving (POP3) server name Enter up to 63-character string
POP3 port number 0 to 65535
Time zone UTC-12:00 to UTC+13:00
POP3
settings
Inquiry interval 1 to 1440 [minutes]
Inquiry after
sending an email
Normal, Per minute
POP3 encryption Off, StartTLS, Over SSL
Immediately
receiving
Execute
Identication name Enter up to 15-character string
Network time setting
Network time Off, On
NTP server Enter the character string
Time zone -12: 00 to +13:00 (in 1-hour unit)
Sync time 0:00 to 23:59
Sync mode Synchronize at once, Synchronize gradually
Connection test Execute