GRAPHTEC GL840 - Page 153

3-77
CHAPTER 3 Settings and Measurement
E-mail settings
Perform the settings to send the e-mail from the GL840.
The e-mail with the notication setting information (Alarm, Low Battery, Low communication strength, Free
space in the internal memory (SD1) or SD CARD (SD2) (only when data capturing) is sent. In addition, when
setting to the Periodic notication, the e-mail will be sent in the set time.
(1)
(2)
(3)
(4)
(1) <Outgoing mail settings>
Selection item Description
Outgoing mail
settings
E-mail
address
settings
TO Set the e-mail address of the e-mail destination. (Up to 63 characters)
CC1 to CC3 Up to three e-mail addresses can be set as CC (carbon copy). (Up to
63 characters)
Subject The e-mail subject can be registered in the character string entering.
(Up to 63 characters)
Notication
settings
Alarm When it is set to On, the occurrence of alarm is notied.
Low battery When it is set to On, the low battery information is notied.
Low signal
strength
When it is set to On, the low signal strength information is notied.
SD card free
space
When setting to On, free space information of the capturing
destination memory is notied.
Periodic
notications
Set the time to send the notication setting information with the
e-mail to any address.
(2) <E-mail account setting>
Selection item Description
E-mail account
setting
User name Set the e-mail account. (Up to 63 characters)
Password Set the e-mail password. (Up to 31 characters)
E-mail address Set the e-mail address of the destination. (Up to 63 characters)