GRAPHTEC GL840 - Page 152

3-76
CHAPTER 3 Settings and Measurement
FTP server settings
Make the settings to make the GL840 function as an FTP server.
(1) (2) (3) (4)
Description
(1) Anonymous connection Set whether to allow Anonymous connection.
Disable: Do not allow Anonymous connection.
Enable: Allows Anonymous connection.
(2) User Name Enter the user name of the FTP account. (Up to 31 characters)
The default is "GL840".
(3) Password Enter the password of the FTP account. (Up to 31 characters)
The default is "GL840".
(4) Port Number Enter the port number of a port to be used for FTP. It is normally 21. (0 to 65535)
WAB server settings
Make the settings to make the GL840 function as a WEB server.
(1) (2) (3) (4)
Description
(1) Port Number Enter the port number used for the WEB. Usually, this number is 80. (65535)
(2) Basic authentication When connecting to the WEB server, it can be restricted by user name and password.
Off: Basic authentication is disabled.
On: Basic authentication is enabled and restricts access by username and password.
(3) User Name Enter the user name of the basic authentication. (Up to 31 characters)
The default is "GL840".
(4) Password Enter the password of the basic authentication. (Up to 31 characters)
The default is "GL840".