GRAPHTEC GL840 - Page 163

3-87
CHAPTER 3 Settings and Measurement
(6)-4 Specify Save Destination (Screen Copy)
Saves the data that is replaying on the screen in the internal memory (SD1) or SD CARD (SD2) as an image
le.
<If the naming method is Auto> <If the naming method is User (Arbitrary)>
(1)
(2)
(3)
(1)
(2)
(3)
(4)
Setting Description
(1) File Type Sets the le format used to save data.
BMP : Saves data in bitmap le format
PNG : Saves data in ping format
(2) Name Type Set how a data le should be named.
Auto : Automatically supplies the le name.
Example : 20150201-123456.BMP
Number part : File creation date
* The le is created on February 1,2015, 12:34:56 in this example.
BMP : Data format
BMP : Bitmap le format
PNG : Ping format
User : Data is captured to a le with an entered le name.
Sequential number : A le is created with an arbitrary le name that has been entered,
followed by a sequential number.
(3) Folder Specify the save destination folder. Refer to "(7) File box" for details..
(4) File Name Specify the save destination folder. Refer to "(7) File box" for details.
(6)-5 Execute (Screen Copy)
Executes screen copy and saves it to an image le.
* Refer to "(6)-4 Specify Save Destination (Screen Copy)" for details on specifying the save destination.
(6)-6 Save
Saves the setting conditions of the GL840.
<If the naming method is Auto> <If the naming method is User (Arbitrary)>
(2)
(1)
(3)
(2)
(1)
(3)
(4)
Setting Description
(1) Save details Set the details of saved data setting.
Operation setting: Settings related to the operation of this device are saved.
Communication setting: Settings related to the communication are saved.
(2) Name Type Set how a data le should be named.
Auto : Automatically supplies the le name.
Example : 20150201-123456.CND
Number part : File creation date
* The le is created on February 1,2015, 12:34:56 in this example.
CND : Data format (GL840 setting le format)
User : Data is captured to a le with an entered le name.
Sequential number : A le is created with an arbitrary le name that has been entered,
followed by a sequential number.
(3) Folder Specify the save destination folder. Refer to "(7) File box" for details.
(4) File Name Specify the save destination folder. Refer to "(7) File box" for details.