3-86
CHAPTER 3 Settings and Measurement
(6)-3 Remove / replace SD CARD
The SD CARD can be replaced during saving the data in the SD CARD.
Perform the card replacement according to the following procedure.
(1) Press the [FILE] key to open the FILE menu.
(2) Press the [ENTER] key in “Remove/Switch SD CARD 2”.
File Menu GL840-M/GL840-WV
(3) Make sure that the message is displayed and then remove the SD CARD.
SD CARD
x GB
Lock
Do not remove the SD CARD until this message is displayed.
Data may become corrupt and inaccessible.
(4) Insert the new SD CARD.
SD CARD
x GB
Lock
(5) Make sure that the SD CARD2 (SD2) access indicator turn green and then press the [ENTER] key.
For access to SD CARD, refer to “3.1 Window names and functions”.
Please perform the replacement oeration within the displayed time in the message.
When the data capturing in CSV format and the backup function are enabled, the SD CARD cannot be
replaced.
Every time you replace the SD CARD, “_CHG” number is added to the le name.
(Example) When the data is captured in the le name "TEST.GBD"
First SD CARD: TEST.GBD
Second SD CARD: TEST_CHG1.GBD
To Next Page
Loading...
