GRAPHTEC GL840 - Page 176

3-100
CHAPTER 3 Settings and Measurement
(11) NAVI menu
The “MENU” screen is displayed by pressing the [NAVI] key during free-running. When you operate in
accordance with the instructions displayed on the screen, the capturing, trigger, and wireless LAN, etc. can
be set.
<NAVI menu>
Setting items Description
Easy Capture Settings The conditions (input, sensor, range, and sapling) for data measurement and data capture
can be set in accordance with the instructions displayed on the screen.
Easy Trigger Settings The settings (trigger) for data capture can be set in accordance with the instructions
displayed on the screen.
Wireless LAN Settings This is displayed when optional wireless unit is installed. The wireless LAN settings and the
wireless sensor (GL100-WL + GS sensor and terminal/adapter/ remote terminal (GLT400))
connection settings can be set in accordance with the operation procedure displayed on the
screen.
<Example of operation procedure>
An example of the operation procedure for easy capture setting is described below.
1. Select the “Easy Capture Settings” and then press the [ENTER] key to display the following menu screen.
2. When the settings (input, sensor, and range) are satised, select the "Next>>" and then press the [ENTER]
key. The “Input, Sensor, and Range, etc.” screens are displayed. Set the necessary items.
3. After setting, when you the "Next>>" is selected and then the [ENTER] key is pressed, the “Sampling,
Interval, Capture Destination” screens are displayed. Set the necessary items.