3-14
CHAPTER 3 Settings and Measurement
<Data replay during capture>
< Replay screen display> <2-screen replay display> <Integrated bar graph display>
For CSV-formatted data, only the data captured by this GL840 can be replayed.
Also, when the data captured in CSV format is replayed, the unit of the temperature data is displayed in “deg
C” rather than “°C”.
Only when the integrated CH is included in the data, the integrated bar graph can be displayed. For details,
please refer to “(10) Integrated bar graph display” in “3.4 Setting Menus”.
(12) CURSOR (ALARM CLEAR)
• This key is used to switch between cursors A and B during replay.
Pressing this key switches between cursor A and B.
Refer to “(9) Data replay menu” in “3.4 Setting Menus” for details on cursor
operation.
Cursor B Cursor A
Cursor A Cursor B
• When the alarm setting is “Hold generated Alarm”, the maintained alarm is
cleared.
Alarm-generated channels
Alarm output terminal status
• Black : Alarm is not issued
• Red : Alarm is issued
To Next Page
Loading...
