3-15
CHAPTER 3 Settings and Measurement
(13) FILE
This key is used to perform the le-related operations.
• Performs the operations (copy and delete, etc.) for the internal memory (SD1)
and SD CARD (SD2).
• Performs the screen copy
• Saves all data or data between cursor A and cursor B during replay (can be
set during replay only)
• Saves or reads the currently set condition into the USB device. (can be set
during Free Running only).
• Replaces the SD CARD (SD2) during data capture (Settable when capturing
or backing up to the SD CARD) and when the backup is performing for the
CSV Format, the SD CARD can not exchange.
Refer to “(6) FILE menu” in “3.4 Setting Menus” for details on le operation.
(14) NAVI
Press the [NAVI] key during free-running to display the MENU screen for Navigation.
<Navigation display>
Operations
1. Select the “Easy Capture Settings” and then press the [ENTER] key to display
the following menu screen.
In this screen, you can set the basic settings such as input, sensor, and
range, etc.
2. Select the “Easy Trigger Settings” and then press the [ENTER] key to display
the following menu screen.
In this screen, you can set the basic trigger settings to start the data capture.
To Next Page
Loading...
