GRAPHTEC midi LOGGER GL240 - Page 107

3-65
CHAPTER 3 Settings and Measurement
(5)-6 Server setting
When the access point is set, set to AP-IP, and when the station is set, set to ST-IP.
Setting Selections available
FTP server setting FTP Client FTP Server Enter up to 127-character string
User Name Enter up to 31-character string
Password Enter up to 31-character string
Port Number 0 to 65535
PASV Mode Off, On
FTP Server Connection Test Press right key to execute
FTP server Port number 0 to 65535
WEB server Port number 0 to 65535
E-mail setting E-mail send
setting
Destination
setting
To Enter up to 63-character string
CC1 to CC3 Enter up to 63-character string
Subject. Enter up to 63-character string
Notication
setting
Alarm Off, On
Low Battery Off, On
Low communication
strength
Off, On
Free space in SD
memory card
Off, On
Periodic notication Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours,
specied time
E-mail account
setting
User name Enter up to 63-character string
Password Enter up to 31-character string
E-mail address Enter up to 63-character string
E-mail send
Server setting
Sending (SMTP) server name Enter up to 63-character string
SMTP port number 0 to 65535
Time zone UTC-12:00 to UTC+13:00
SMTP setting SMTP
authentication
method
Off, POP before SMTP, SMTP-AUTH
SMTP-AUTH Off, PLAIN, LOGIN, CRAM-MD5
Same as POP3 No or Yes
SMTP user name
(user ID)
Enter up to 63-character string
SMTP password Enter up to 31-character string
SMTP encryption Off, StartTLS, Over SSL
Test send Press right key to execute
E-mail receiving
server setting
Receiving (POP3) server name Enter up to 63-character string
POP3 port number 0 to 65535
Time zone UTC-12:00 to UTC+13:00
POP3 setting Inquiry interval 1 to 1440 [minute]
Inquiry after sending
e-mail
Normal, Per minute
POP3 encryption Off, StartTLS, Over SSL
Immediately receive Press right key to execute
WAB server setting Port number 0 to 65535