3-9
CHAPTER 3 Settings and Measurement
(2) TIME/DIV
Press the left/right key of the [TIME/DIV] key to change the time axis display
width.
TIME/DIV display
(3) MENU
Open the settings window to capture data. For details on settings, refer to “3.4
Setting Menus” .
(4) QUIT (LOCAL)
This key is primarily used for the following operations.
• To cancel a setting during menu conguration.
• To return to the MONITOR screen when the SPAN/POSITION/TRACE screen
is displayed.
• To cancel remote status (in which keys are disabled) through interface control.
• To close the menu screen.
• To quit data replay.
To Next Page
Loading...
