GRAPHTEC midi LOGGER GL240 - Page 52

3-10
CHAPTER 3 Settings and Measurement
(5) Direction Keys
This key is primarily used for the following operations.
• To move a menu or setting item during menu conguration.
• To move the cursor during replay.
• To move the active channel in the Waveform + Digital and Digital + Calculation
Display screens ( keys).
• To change the setting of SPAN/POSITION/TRACE ( keys).
• To change the Quick setting ( keys).
• To change the channel to be displayed in the Digital + Calculation Display
screen ( keys).
(6) ENTER
This key is primarily used for the following operations.
• To nalize setting items during menu conguration or open submenus.
(7) FAST FORWARD key (KEY LOCK)
This key is primarily used for the following operations.
• To move the cursor at high speed during replay.
• To change the operation mode in the le box.
• To set key lock (Hold down the left/right FAST FORWARD key for at least two
seconds. Press again to unlock)
A password for canceling the key lock can be specied.
Refer to “(13) To cancel key lock by password” in “3.4 Setting Menus” for
details.
• To change the display mode in the Digital + Calculation Display screen.
4ch Mode 10ch Mode All Mode