JUPITER CM-4400 Control Module Installation and Operating Manual 203
Exclusion
Exclusion
The Exclusion table can be used to prevent a particular input from being
switched to a given output.
Note No exclusions are allowed on data levels.
Figure 150. The Exclusion Table
Configuring an Exclusion
Follow these steps to configure the Exclusion table:
1. Select the input that cannot be switched from the Logical Input drop-
down list.
2. Select the output to which the specified input cannot be switched from
the Logical Output drop-down list.
3. Click the Apply button
1
Exclusion
Logical Input
MULTBRST
Logical Output
XMIT
2 SINESQ XMIT
6600_Exclusion-Data-Table
To Next Page
Loading...