GRASS VALLEY JUPITER CM-4400 - VERSION 7.9.0 - 10-2010 User Manual

24 JUPITER CM-4400 Control Module Installation and Operating Manual
Regulatory Notices
Canadian Certified Power Cords
Canadian approval includes the products and power cords appropriate for
use in the North America power network. All other power cords supplied
are approved for the country of use.
Canadian Certified AC Adapter
Canadian approval includes the AC adapters appropriate for use in the
North America power network. All other AC adapters supplied are
approved for the country of use.
Laser Compliance
Laser Safety Requirements
The device used in this product is a Class 1 certified laser product. Oper-
ating this product outside spec
ifications or altering from its original design
may result in hazardous radiation exposure, and may be considered an act
of modifying or new manufacturing of a laser product under U.S. regula-
tions contained in 21CFR Chapter 1, subchapter J or CENELE
C regulations
in HD 482 S1. People performing such an act are required by law to recertify
and reidentify this product in accordance with provisions of 21CFR sub-
chapter J for distribution within the U.S.A.
, and in accordance with
CENELEC HD 482 S1 for distribution within countries using the IEC 825
standard.
Laser Safety
Laser safety in the United States is regulated by the Center for Devices and
Radiological Health (CDRH). The laser safety regulations are published in
the “Laser Product Performance Standard,” Code of Federal Regulation
(CFR), Title 21, Subchapter J.
The International Electrotechn
ical Commission (IEC) Standard 825, “Radi-
ation of Laser Products, Equipment Cl
assification, Requirements and
User’s Guide,” governs laser products outside the United States. Europe
and member nations of the European Free Trade Association fall under the
jurisdiction of the Comite European de Normalization Electrotechnique
(CENELEC).
For the CDRH: The radiant power is detected through a 7 mm aperture at
a distan
ce of 200 mm from the source focused through a lens with a focal
length of 100 mm.
For IEC compliance: The radiant power is detected through a 7 mm aper-
ture at a distance of 100 mm from the source focused through a lens with a
focal
length of 100 mm.

GRASS VALLEY JUPITER CM-4400 - VERSION 7.9.0 - 10-2010 Specifications

General

Brand	GRASS VALLEY
Model	JUPITER CM-4400 - VERSION 7.9.0 - 10-2010
Category	Control Systems
Language	English