286 JUPITER CM-4400 Control Module Installation and Operating Manual
Appendix B — Connecting Legacy and 3rd Party Routers
Serial Control Router Protocols
Alpha Image
Data Tek
GVG Native (outgoing)
Nexus
Pro-bel Eclipse
Utah 96
EScontrol
Utah 12
Nexus Star
GVG Horizon
SWP-08
Triton Systems
Triton routers are connected using a CM-4400 serial port. Multiple Triton
chassis can be connected to a single CM-4400, but only if all the routers are
connected using the same MIDI bus and connected through the same single
serial port. If more than one Triton MIDI bus is needed, the switchers on
that bus must be connected to another CM-4400.
The serial connector on Triton routers is
a 9-pin RS-232 signal level port.
Since the CM-4400 uses RS-422 ports, a RS-422 to RS-232 converter must be
used to ensure reliable communications. Figure 218 on page 287.
To Next Page
Loading...