54 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 2 — Hardware Installation
Please refer to Figure16 for details concerning each switcher type. The
Installation manual that is supplied with
the routing switcher should also
be checked for port configuration instructions.
Figure 16. Serial-Control Switcher Restrictions
In the highlighted example in Figure16, Physical levels cannot be dupli-
cated on a CM-4400 unless Logical Level Mapping or an offset of 400 is
us
ed or a level offset. ESControl uses 400 for the offset but other protocols
use 100, 200, and so forth.
Only one remote
switcher of a given type
can be connected to a
single CM 4400.
Physical levels cannot be duplicated on a CM-4400
Level 1
Serial−control
Switcher
Level 1
Grass Valley
Crosspoint Bus
Switcher
Serial−control
Switcher
Serial−control
Switcher
To Next Page
Loading...