KARRERA — Installation & Service Manual 175
Eng Setup Menu Summaries
Note Changing a Menu’s identity in this way is temporary. Reloading the Menu
application or rebooting the Menu Panel will restore the Suite and Control
Surface identity defined in the Node Settings, Control Surfaces Menu.
Karrera system resources can be allocated to each suite. By default all
Karrera system resources are allocated to suite 1. See
Multiple Suite Resource
Sharing on page 161 for more information.
Note Changing a Menu’s identity in this way is temporary. Reloading the Menu
application or rebooting the Menu Panel will restore the Suite and Control
Surface identity defined in the Node Settings Control Surfaces Menu.
SetDef MatchDef Menu
Figure 122. SetDef MatchDef Menu, SetDef Selected
The SetDef and MatchDef options permit line rate signal format conversion
of selected Karrera system outputs and inputs. SetDef output and
MatchDef input conversion is licensed in connector pairs. Connectors are
active when the associated Video Processor Frame ME board is present and
the license is enabled. Selecting an output or input button automatically
brings up controls for that conversion.
To Next Page
Loading...
