KARRERA — Installation & Service Manual 255
Touchscreen Calibration
Figure 205. Video Processor Frame Controller Board Battery
3. Remove the old battery by lifting the clip holding it in place.
4. Put the new battery in place and secure the clip.
5. Re-insert the frame controller board and close the frame door.
Touchscreen Calibration
The Karrera Touch Screen Menu Panel is adjusted in the factory before
shipment, and so should not require calibration. If the Menu Panel does not
respond correctly to screen touches, however, you can perform this proce
-
dure.
1. Minimize or Exit the Karrera Menu application.
2. With the Windows desktop visible, click on Start/Programs/Hampshire
TSHARC Control Panel
. The Hampshire application will open (Figure 206).
Figure 206. Hampshire Calibration Application
KHD_FrameBatteryCU
To Next Page
Loading...
