Code 22
Heli type
M
new functions 17
odel type programming for helicopter models
H E L I T Y P
Taumelscheibentyp 1 Servo
Linearis. Taumels.
nein
Rotor-Drehrichtung links
Pitch min vorn
Expo Gaslimit 0%
Grenze Gaswarnung - 70%
SEL
This menu has now two further options:
”Linearisation of the swash plate control“ and
“Throttle warning limit“.
“Linearisation of the swash plate“:
Enter “Yes“ inhibits unwanted side effects in the
control of the swash plate i.e. pitch change when roll
is activated or tensions on the controlling push rods
an develop when
the relevant servos because of a difference in servo
arm position have a non-equal linear movement.
“Throttle warning limit“:
You will be alerted with an audible
warning and pop-up window when
the throttle is set to high as the
transmitter is switched to “ON“.
ith the “Throttle warning limit “ You can adjust the
critical throttle servo high position from which the
warning should occur between 0% to –100%.
The reference is her the pitch minimum position of
the control stick “foreward’ or “rearward“ used.
Normally a control throw value of -70 % is used.
of the swash plate servos. They c
Gas
zu
hoch!
W
CLEAR resets the indication to that value.
To Next Page
Loading...
Need help?
General
