GRAUPNER mc-24 PROFI-ROM

• You can nominate the position of a free selectable
switch that will tell you after switch-on if the
transmitter is in the “correct“ flight phase for
example:
Control comfort and Control safety 5
STOPFNK RUNMOD
Stoppuhr
Flugzeit
0 00
0 00
:
:
SPCM20
DV20 KATANA
Mod. 03 5:46h !Warnung!
Uwe Corbach
Akku 0:34h
10.8V
•
In the Heli-program you can be alerted by pop-up
window “warning“ and “audible warning“ tone that
the throttle control is too advanced:
STOPFNK RUNMOD
Stoppuhr
Flugzeit
0 00
0 00
:
:
SPCM20
MEGA STAR
Mod. 04 8:31h
Uwe Corbach
Akku 0:54h
10.7V
Gas
zu
hoch!
Basic transmitter display: Modulation type
If no additional flight phase timer is activated in the
lower field the transmitter modulation type will be
displayed in the field next to the
GRAUPNER-Logo.
Secret code entry
The secret code is no longer visable.
Instead it is indicated with“****“ (asterisks)
Indication of time overrun
In all countdown timers (Alarm timer) is now with
time overrun a new (inverse) symbol displayed in
the default display for more clarity.
Model-type Icon, Info-Text, Name entry
In the Codes 11 »Model select«, 12 »Copy/Erase«
and 14 »
Suppress models« the model name is
displayed along with the relevant model type for
fixed wing and helicopter, with the graphic icon
or
.
01 CUMULUS 97 1:25h SPCM20,Kanal 70
02 Laser 2:45h PPM18,Kanal 75
03 DV20 KATANA 5:46h noch Testphase
04 MEGA STAR 8:31h Trimmg neu just
05

frei

0 1 2 3 4 5 6 7 8 9
Additionaly you have the choice in Code 21 »Base
setup model
« (see Page 13), to enter a short (max.
15 characters) text note to every model memory.
The large table of symbols and characters makes
the composition easy.