GRAUPNER mz-24 HOTT

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
64
• ALARM VOLT
It is the low voltage alarm setup for receiver power battery. Transmitter sounds an alarm throughout
telemetry technology when the battery of receiver reaches the low voltage limit.
Touch “SET” icon to activate the value in red and adjust the value with INC and DEC buttons.
Touch “SET” icon again to deactivate the value. Touch INC button to move the cursor to “ALARM
TEMP+”
• ALARM TEMP +/-
It is the alarm setup for the maximum/minimum temperature of receiver. Transmitter sounds an alarm
throughout telemetry technology when the temperature of receiver reaches the temperature limits.
Touch “SET” icon to activate the value in red and adjust the value with INC and DEC buttons. Touch
“SET” icon again to deactivate the value. Touch INC button to move the cursor to “CH OUT TYPE”
Touch
Touch
Touch
Touch