GRAUPNER mz-24 HOTT

14-6. DISPLAY SETUP FOR TELEMETRY SENSOR
All telemetry indication of the sensors are displayed at the receiver telemetry page.
Connect option sensors to receiver and access to the sensor select setup page by course of
page transfer.
Touch “OFF” icon of the connected sensors to switch to “ON” at the sensor select setup page.
After that, return to the receiver telemetry page. You may check all telemetry indication here
and access to the next page by touching “NEXT” icon on the top left
Telemetry
Telemetry
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch Touch
Touch
Touch
71