GReddy Profec - Product Description; Before Installation; Product View; Tools and Instruments

・Makesurethatengineiscoolwhenyoubegintheinstallation.

・Makesurethathosesarelongenoughtoreachvalveunit,beforeyoumountit.
・Beforetheinstallation,findthelocationsofwastegate,boostcontrolsolenoid
valve,fuelpressureregulator.
1.Display
2.SELECTswitch
3.MODEswitch
4.SETDIAL
Controlunit
2
3 4
8
7
Powerunit
5.Mountingflange
6.Mainharness
7.BoostPressureSensor
8.Valveunitharnessconnector
1
5
6
Pleasereadcarefully
ProductDescription
BeforeInstallation
Installation
Tools&Instruments
・Multi-meter(Over15Vmeasurementcapability)
・Wirecutters
・+Phillipsand-SlottedScrewdrivers
・Pliers
・10mmwrench
・Wirecutters
・Solderingiron
・Crimpingtool
・Electricaltape
・Spliceconnectors
・Solderingiron
・Cableties
Forthetechnician
Fortheuser
Pleasereturnthismanualtothecustomerwheninstallationandmountingare
completed.
Whenthepersonotherthantheownerusesavehicle,pleasetellhim/herthat
Profecisinstalledandpassthisinstructionmanualtotheperson.